» Support Center » Knowledgebase » What is the PC port on my CGE mount for?
 What is the PC port on my CGE mount for?
Answer  The PC port can be used with the MCUpdate software to flash or update the motor control (MC) firmware on your CGE  mount. It can also be used with Nexremote to control your scope. You need the programming cable from Celestron (part number 93922).

If you have hand control firmware version 4.13 or higher, the MC firmware can be upgraded via the port on the bottom of the hand control. For this you need the NexStar RS-232 cable (part number 93920). 

If your computer lacks a serial port, you’ll also need a USB to RS-232 converter cable for either method (Celestron part number 18775).

For the wiring diagram for the cable, please see the NexStar Resource Site's webpage:

http://www.nexstarsite.com/PCControl/ProgrammingCable.htm


Article Details
Article ID: 2044
Created On: Nov 10 2008 04:59 PM

 This answer was helpful  This answer was not helpful


Repair/RMA Procedure

 Search
 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Article Options