Why do I need polar alignment?
As the earth rotates around its axis, the stars appear to move across the sky. If you are observing them using an altitude-azimuth (alt-az) mount, they will quickly drift out of view. Readjustments to get them back in view are awkward and frequent or require computerized tracking. In order to avoid these problems for either visual astronomy or astrophotography, you need a different type of mount that’s oriented or aligned to make following the apparent motions of the stars much easier than with an alt-az mount. A telescope on an equatorial mount can be aimed at a celestial object and easily track the daily motion, keeping it in your eyepiece. It works by first polar aligning or inclining it at an angle equal to your latitude and pointing one axis (called either the polar axis or right ascension (RA) axis) in the same direction as the earth’s rotational axis (towards the celestial pole). Once the polar axis is parallel to the earth’s axis and turned at the same rate of speed as the earth, but in the opposite direction, objects will appear to stand still when viewed through your scope. There is no rotation of the field of view and tracking can be extremely accurate, making the equatorial mount perfect for astrophotography. It has two motions: in RA (east-west) and in declination (dec, north-south). With the use of setting circles, a polar-aligned equatorial mount can quickly find celestial objects. The north celestial pole (NCP) is the point in the sky around which all the stars appear to rotate. The star Polaris lies less than a degree from the NCP and it can be used to roughly polar align a telescope. However, for accurate polar alignment, the polar axis of the telescope's mount needs to be aligned to the true NCP. Aligning the telescope to the earth's rotational axis can be a simple or rather involved procedure depending on the level of precision needed for what you want to do. For casual observing, only a rough polar alignment is needed. Better alignment is needed for tracking objects across the sky (either manually or with a motor drive) at high magnifications. Still greater precision is needed in order to use setting circles to locate those hard-to-find objects. Finally, astrophotography will require the most accurate polar alignment of all.
Created On: Dec 23 2008 04:58 PM