Celestron - Accessories

redirecting... Celestron - Accessories


	STATE-OF-THE-ART TECHNOLOGY. EASY-TO-USE FEATURES. READY-TO-USE COMPONENTS.

Navigation: /home/products/Accessories




ACCESSORIES

GENERAL ACCESSORIES

EYEPIECES/BARLOWS

ACCESSORY KITS

NAVIGATIONAL ACCESSORIES

POWER SUPPLIES

CASES

DRIVES/MOTORS

FILTERS

LENS SHADES

OPTICAL ACCESSORIES

PHOTOGRAPHIC/ VISUAL ACCESSORIES

TRIPODS/WEDGES

PUBLICATIONS/BOOKS/ SKY MAPS

Accessories

Drives / Motors

Motor Drive, Logic Item# 93510 Motor Drive, Logic

Item #93511, Firstscope 114 EQ, 80EQ

Allows telescopes to track the motion of the sky once the telescope is polar aligned.
These economy models are single axis (R.A.), DC motor drives. They are powered by one 9-volt alkaline battery (user supplied) which lasts up to 40 hours. A speed rate regulator is included to adjust the speed slightly faster or slower.

Motor Drive, Single Axis Models with Hand Controls

Motor Drive, Single Axis Models with Hand Controls Item# 93515 Item #93515, Firstscope 114 EQ, 80EQ

Allows telescopes to track the motion of the sky once the telescope is polar aligned. These models are single axis (R.A.), DC motor drives. They are powered by four D-cell batteries (user supplied). 2x and 4x sidereal speeds are available through the included hand controller.

Motor Drive, Dual Axis Model

Motor Drive, Dual Axis Model Item #93522, Advanced C4 R, C6 N (with CG-4 mount)
Item #93523, Advanced C5 S, C6 R, C8 S, C 91/4 S, C8 N, C10N (NON GT)

These dual axis motor drives, with drive corrector capabilities, are designed for Celestron's CG-4 and CG-5 mounts for tracking in RA and allows movement in DEC. They precisely control the telescope's tracking speed during long, timed exposures of celestial objects, producing the best possible image sharpness. Precision drive correctors are a must for those with a serious interest in astrophotography or CCD imaging. Four speeds are available -- 1x (sidereal), 2x for guiding, 4x, and 8x for centering.

These precision, state-of-the-art DC motor drives operate from 4 D-cell batteries (user supplied). The hand controller module is very compact and fits easily in the palm of your hand. Motors for both axes are included, along with brackets, clutches and hardware.