How do I connect my computerized telescope to my computer using NexRemote?

1. Make sure the telescope is powered on.

2. When using a serial to USB connection, make sure the drivers for the serial to USB adapter are installed.

3. Verify that your connections are snug. Check the cable going into the hand control, the hand control into the computer, the RS232 into the USB adapter and lastly, the adapter into the PC. 

From the computer device manager, make sure that you can see the port to which the USB adapter is connected. Once the port is identified, select the proper port while in NexRemote. Next, select the proper mount model for your telescope. Once these items have been verified you can now proceed to use NexRemote.


Updated 12/14/13