The SLT hand control has EQ-North and EQ-South listed, but there is not ...

You will need to remove the mount from its Celestron tripod.The mount base has a 1/4 x 20 threaded hole that can be used with aftermarket tripods that can be...

The SLT hand control has EQ-North and EQ-South listed, but there is not ...

You will need to remove the mount from its Celestron tripod.The mount base has a 1/4 x 20 threaded hole that can be used with aftermarket tripods that can be...

When should I use the Calibrate Mount utility? What does it do?

For Celestron’s German equatorial GoTo mounts, this feature is found in the menu under Utilities. There are two functions in the Calibrate Mount sub-menu. Depending on exactly what mount you...

When should I use the Calibrate Mount utility? What does it do?

For Celestron’s German equatorial GoTo mounts, this feature is found in the menu under Utilities. There are two functions in the Calibrate Mount sub-menu. Depending on exactly what mount you...

I want to permanently pier-mount my CGEM. What size is the hole on the h...

The CGEM’s equatorial head has a center flange 29.5 mm in diameter. It is centrally bored out with a threaded hole that is M12x1.75. The entrance to the hole is...

I want to permanently pier-mount my CGEM. What size is the hole on the h...

The CGEM’s equatorial head has a center flange 29.5 mm in diameter. It is centrally bored out with a threaded hole that is M12x1.75. The entrance to the hole is...

Why does my PowerSeeker 127EQ has only one counterweight, yet the manual...

The PowerSeeker 127EQ model originally shipped with one 5 lbs and one 2 lbs counterweights. In 2009, Celestron switched to a single, heavier counterweight that presently ships with the telescope....

Why does my PowerSeeker 127EQ has only one counterweight, yet the manual...

The PowerSeeker 127EQ model originally shipped with one 5 lbs and one 2 lbs counterweights. In 2009, Celestron switched to a single, heavier counterweight that presently ships with the telescope....

I have a CGEM mount and I need to use it at latitudes below 15 degrees o...

The mount does have latitude limits.However, at your own risk, you can use the tripod to extend the range. For lower or higher latitudes, the tripod legs would have to...

I have a CGEM mount and I need to use it at latitudes below 15 degrees o...

The mount does have latitude limits.However, at your own risk, you can use the tripod to extend the range. For lower or higher latitudes, the tripod legs would have to...

I’m setting up my AstroMaster equatorial mount. Should the declination (...

Yes, towards the rear or mirror end of your scope is the usual position for the DEC control.However, because the scope is mounted inside tube rings and it has a...

I’m setting up my AstroMaster equatorial mount. Should the declination (...

Yes, towards the rear or mirror end of your scope is the usual position for the DEC control.However, because the scope is mounted inside tube rings and it has a...